<rp id="htsig"><object id="htsig"><blockquote id="htsig"></blockquote></object></rp><th id="htsig"><track id="htsig"></track></th>
<em id="htsig"></em>

  1. Skip navigation Accessibility information

    Index of Materials - P



    Metals and Materials for Research and Industry

    Goodfellow supplies metals, polymers, ceramics and other materials to meet the research, development and specialist production requirements of science and industry worldwide.

    This interactive Catalogue lists all our standard products. You can buy all of them online but if you cannot find exactly what you need, please contact us.


    P-Type - Electrical Type
    P100 - Grade
    Pale Grey - Colour
    Palladium ( Pd )
    Palladium/Chromium ( Pd94/Cr 6 )
    Palladium/Copper ( Pd60/Cu40 )
    Palladium/Nickel ( Pd95/Ni 5 )
    Palladium/Silver ( Pd75/Ag25 )
    Palladium/Silver ( Pd77/Ag23 )
    Paper - Type
    Particle Size D10 - 15-35 Micron
    Particle Size D50 - 90 Micron
    Parylene - Coating
    Paste Extruded - Condition
    Pb 96%, Sn 1.5%, Sb 2.5% - Composition
    Pb 97%, Sn 1.5%, Sb 1.5% - Composition
    PDMS
    Peelable - Heat Sealable - Grade
    Pellets - Condition
    Pellets - Nominally 10mm Diameter x 10mm Length - Condition
    Pellets - nominally 3mm diameter x 3mm length - Condition
    Pellets - Nominally 3mm Diameter x 6.5mm Length - Condition
    Pellets - nominally 6.35mm diameter x 6.35mm length - Condition
    PEN
    Peridot ( Mg2Fe2/SiO4 )
    Permalloy C® - Magnetic Shielding Alloy ( Ni77/Fe14/Cu 5/Mo 4 )
    Permalloy D® - Invar® - Controlled Expansion Alloy ( Fe64/Ni36 )
    Permanent Aluminium 0.04mm - Support
    Permanent Copper - Support
    Permanent Mylar® 3.5micro-m - Support
    Permendur 49® - Permendur 49® ( Co49/Fe49/V 2 )
    Perovskite - Condition
    Perspex - Polymethylmethacrylate ( PMMA, Acrylic )
    PET
    PET - Substrate
    Phenolic - Adhesive
    Phosphor Bronze ( Cu94/Sn 6 )
    Phosphor Bronze ( Cu95/Sn 5 )
    Phosphor Bronze ( Cu92/Sn 8 )
    Phosphorene
    Phosphorous Deoxidised Non Arsenical Copper - Copper - DHP ( Cu - DHP )
    Phosphorus ( P )
    Phosphorus - Dopant
    Piezo-electric Film - Condition
    Plain - Weave
    Plain Weave Mesh - Type
    Platelet Planar Size - 0.3-5micro-m
    Platelet Thickness - 1+/-0.7 nm (3 +/- 2 layers)
    Platelet Thickness - 3+/-2 nm (9 +/- 6 layers)
    Platelet Thickness - <50nm
    Platinised - Condition
    Platinised on Both Sides 2 Micron Thick - Condition
    Platinum ( Pt )
    Platinum Plated Wire - Condition
    Platinum/Iridium ( Pt85/Ir15 )
    Platinum/Iridium ( Pt90/Ir10 )
    Platinum/Iridium ( Pt80/Ir20 )
    Platinum/Iridium ( Pt70/Ir30 )
    Platinum/Iridium ( Pt75/Ir25 )
    Platinum/Rhodium ( Pt80/Rh20 )
    Platinum/Rhodium ( Pt90/Rh10 )
    Platinum/Rhodium ( Pt87/Rh13 )
    Platinum/Rhodium ( Pt70/Rh30 )
    Platinum/Rhodium ( Pt94/Rh 6 )
    Platinum/Rhodium ( Pt83/Rh17 )
    Platinum/Rhodium ( Pt60/Rh40 )
    Platinum/Tungsten ( Pt92/W 8 )
    Please note, these sheets are bowed - Condition
    Plexiglas - Polymethylmethacrylate ( PMMA, Acrylic )
    Polish - 0.025 - 0.05micro-m Ra
    Polish - 0.05 - 0.1micro-m Ra
    Polish - 0.1micro-m Ra or better
    Polished - Surface Finish
    Polished Both Ends - Surface Finish
    Polished on 1 side / dull on 1 side - Condition
    Polished On All Sides - Surface Finish
    Polished on Both Sides - Scratch/Dig <40/20 - Surface Finish
    Polished On Both Sides - Surface Finish
    Polished On Both Sides to 1 Micron - Surface Finish
    Polished On One Side - Surface Finish
    Polished On One Side To 1 Micron - Surface Finish
    Poly L lactic acid - Biopolymer ( PLLA )
    Poly(ethylene-co-vinyl acetate) ( EVA )
    Polyacrylamide/acrylate ( Hydrogel )
    Polyacrylonitrile ( PAN )
    Polyacrylonitrile-butadiene-styrene ( ABS )
    Polyamide - Nylon 4, 6 ( PA 4,6 )
    Polyamide - Nylon 6 ( PA 6 )
    Polyamide - Nylon 6 - 30% Glass Fibre Reinforced. ( PA 6 30% GFR )
    Polyamide - Nylon 6 - 40% Glass Fibre Reinforced. ( PA 6 40% GFR )
    Polyamide - Nylon 6, 6 ( PA 6,6 )
    Polyamide - Nylon 6, 6 - 30% Carbon Fibre Reinforced ( PA 6, 6 - 30% CFR )
    Polyamide - Nylon 6, 6 - 30% Glass Fibre Reinforced ( PA 6,6 30% GFR )
    Polyamide - Nylon 6,10 ( PA 6,10 )
    Polyamide - Nylon 11 ( PA 11 )
    Polyamide - Nylon 12 ( PA 12 )
    Polyamide - Nylon 12 - 30% Glass Fibre Reinforced ( PA 12 - 30% GFR )
    Polyamide/imide ( PAI )
    Polyaramid ( Polyparaphenylene terephthalamide )
    Polyaramid ( Polymetaphenylene isophthalamide )
    Polyaramid/Polyphenylenesulphide Composite ( Polyaramid fibre - PPS Matrix )
    Polyaramid/Vinylester Composite ( Polyaramid fibre - Vinylester matrix )
    Polybenzimidazole ( PBI )
    Polybutylene terephthalate ( PBT )
    Polybutylene terephthalate - 30% Glass Fibre Reinforced ( PBT 30% GFR )
    Polycarbonate ( PC )
    Polycarbonate - 20% Glass Fibre Filled ( PC - 20% GFR )
    Polycarbonate - 30% Carbon Fibre Reinforced ( PC - 30% CFR )
    Polycarbonate - 30% Glass Fibre Filled ( PC - 30% GFR )
    Polychlorotrifluoroethylene ( PCTFE )
    Polycrystalline - Condition
    Polydimethylsiloxane
    Polyester - Insulation
    Polyester - Support
    Polyetheretherketone ( PEEK )
    Polyetheretherketone 20% mineral filled ( PEEK )
    Polyetheretherketone 30% mineral filled ( PEEK )
    Polyetheretherketone, 20% Glass Fibre Reinforced ( PEEK - 20% GFR )
    Polyetheretherketone, 30% Glass Fibre Reinforced ( PEEK - 30% GFR )
    Polyetherimide ( PEI )
    Polyetherimide - 30% Glass Fibre Reinforced ( PEI 30% GFR )
    Polyetherketone ( PEK )
    Polyetherketoneketone ( PEKK )
    Polyethersulphone ( PES )
    Polyethylene - Carbon filled ( PE )
    Polyethylene - High density ( HDPE )
    Polyethylene - Low Density ( LDPE )
    Polyethylene - U.H.M.W. ( UHMW PE )
    Polyethylene naphthalate ( PEN )
    Polyethylene terephthalate ( Polyester, PET, PETP )
    Polyethylene/Polyethylene Composite ( PE fibre - PE matrix )
    Polyhydroxyalkaonate - Biopolymer ( PHA )
    Polyhydroxybutyrate - Biopolymer ( PHB )
    Polyhydroxybutyrate/Polyhydroxyvalerate 1% - Biopolymer ( Biopolymer )
    Polyhydroxybutyrate/Polyhydroxyvalerate 2% - Biopolymer ( Biopolymer )
    Polyhydroxybutyrate/Polyhydroxyvalerate 8% - Biopolymer ( PHB92/PHV 8 )
    Polyimide ( PI )
    Polyimide - Insulation
    Polyketone ( PK )
    Polyketone 30% Glass Fibre Reinforced ( PK )
    Polyketone 30% Glass Fibre Reinforced ( PK )
    Polyketone 50% Glass Fibre Reinforced ( PK )
    Polyketone Bearing Grade ( PK )
    Polylactic acid - Biopolymer ( PLA )
    Polylactic acid - Biopolymer - Graphene Enhanced ( PLA +Graphene )
    Polylactic acid - Biopolymer -- Nanodiamond enhanced ( PLA + Nanodiamond )
    Polymer - Bolt
    Polymer - Chopped Fibre
    Polymer - Component
    Polymer - Fabric
    Polymer - Fibre
    Polymer - Film
    Polymer - Flake
    Polymer - Foam
    Polymer - Granule
    Polymer - Honeycomb
    Polymer - Laminate
    Polymer - Mesh
    Polymer - Metallised Film
    Polymer - Monofilament
    Polymer - Nut
    Polymer - Powder
    Polymer - Rod
    Polymer - Sheet
    Polymer - Sphere
    Polymer - Tube
    Polymer - Washer
    Polymers
    Polymethylmethacrylate ( PMMA, Acrylic )
    Polymethylpentene ( TPX® )
    Polyoxymethylene - Copolymer ( Acetal - Copolymer POMC )
    Polyoxymethylene - Homopolymer ( Acetal - Homopolymer POMH )
    Polyoxymethylene Homopolymer 20% PTFE Fibre Filled ( POM H 20% PTFE )
    Polyoxymethylene Homopolymer 25% Glass Fibre Filled ( POM H 30% GFR )
    Polyoxymethylene/Acetal Copolymer - 10% Carbon Fibre Reinforced ( POMC - 10% CFR )
    Polyphenyleneoxide ( PPO (modified), PPE (modified) )
    Polyphenyleneoxide (modified), 30% Glass Fibre Reinforced ( PPO 30% GFR )
    Polyphenylenesulphide ( PPS )
    Polyphenylenesulphide - 20% Carbon Fibre Reinforced ( PPS - 20% CFR )
    Polyphenylenesulphide - 40% Glass Fibre Reinforced ( PPS - 40% GFR )
    Polyphenylsulphone ( PPSu )
    Polyphthalamide 35% glass fibre filled ( PPA )
    Polyphthalamide 50% glass fibre filled ( PPA )
    Polyphthalamide 55% glass fibre filled ( PPA )
    Polypropylene ( PP )
    Polypropylene-Polypropylene composite ( PP fibre - PP matrix )
    Polystyrene ( PS )
    Polystyrene - Conductive ( High Impact Conductive Polystyrene )
    Polystyrene - Cross-linked ( PS - X - Linked )
    Polystyrol - Polystyrene ( PS )
    Polysulphone ( PSu )
    Polytetrafluoroethylene ( PTFE )
    Polytetrafluoroethylene - 25% Carbon Filled ( PTFE )
    Polytetrafluoroethylene coated Glass Fabric ( PTFE 75 / Glass 25 )
    Polytetrafluoroethylene filled with Glass ( PTFE 25% GF )
    Polyurethane ( PU )
    Polyurethane - Adhesive
    Polyurethane - Insulation
    Polyvinylchloride - Unplasticised ( UPVC )
    Polyvinylfluoride ( PVF )
    Polyvinylidenechloride ( PVDC )
    Polyvinylidenefluoride ( PVDF )
    Porcelain Mullite - Condition
    Porous Alumino-Silicate - Condition
    Porous Borosilicate Glass - Condition
    Porous Membrane - Condition
    Potassium ( K )
    Potassium Aluminosilicate ( Muscovite Mica )
    Powder
    Powder Coated on Both Sides - Condition
    Praseodymium ( Pr )
    Precipitation Hardenable - Condition
    Precision Sphere - Grade
    Pressboard - Condition
    Pressed - Condition
    Printable Both Sides - Condition
    Produced Using BU396311 - Condition
    PRODUCTION ONLY - Condition
    Propathene - Polypropylene ( PP )
    PTFE (Polytetrafluoroethylene) - Insulation
    Pultruded - Condition
    Pure Sn Coated - Condition
    Purity - >80%
    Purity - 90%
    Purity - 98%
    Purity - 99%
    Purity - 99.5%
    Purity - 99.6%
    Purity - 99.7%
    Purity - 99.9%
    Purity - 99.95%
    Purity - 99.99%
    Pyrolitic - Condition
    Pyrolytic Graphite - Condition
    Pyrophyllite ( Silica 56.8%, Alumina 33.4%, TiO2, Fe3O4 + )

    Index